Dilute Phase Pneumatic Conveying Jet Pump Without Dust Pollution

Pneumatic Conveying Systems - Dilute Phase Pneumatic Conveying Jet Pump Without Dust Pollution

Description

In terms of positive pressure dilute phase continuous pneumatic conveying systems, the company has always been committed to theoretical research and summary of engineering practical experience in pneumatic conveying systems, with a focus on breaking through key technologies such as continuity, wear, sealing, and reliability in the process of positive pressure continuous pneumatic conveying. The core product is the PJP type positive pressure dilute phase pneumatic conveying jet pump, while providing systematic, standardized, and refined engineering design and technical services.

Application Area
The PJP type positive pressure dilute phase pneumatic conveying jet pump is a low-pressure, dilute phase, and continuous pneumatic conveying equipment suitable for situations where the conveying volume is not large and the conveying distance is medium. It can be widely used in industries such as building materials, chemicals, electricity, grain, metallurgy, casting, etc. The conveying materials include cement, raw materials, fly ash, hydrated lime, slag powder, steel slag powder, coal powder, aluminum oxide powder, phosphorus powder, pyrophyllite powder, and organic silicon powder.

Pneumatic conveying equipment has opened up a green channel for conveying powder materials. The low-pressure continuous pneumatic conveying material seal pump adopts low positive pressure dilute phase pneumatic conveying. The working mode is continuous conveying. Especially suitable for medium and short distance transportation of fly ash and various powdered powders. Use the main material. Compared with the warehouse pump, this product has the advantages of small volume, less investment, low wind pressure, fewer vulnerable parts, low maintenance costs, good sealing, and dust-free, and has good economic and environmental benefits.
When the PJP jet pump pneumatic conveying system is installed at the bottom of the silo to transport materials using the pressure of the materials in the silo , changes in the height of the materials in the silo will cause corresponding changes in the material conveying speed. Therefore, the conveying capacity of the materials depends on the height of the materials in the silo.
The working principle of low-pressure dilute phase continuous pneumatic conveyor equipment is based on the principle of pneumatic jet pump. The core component of a low-pressure dilute phase conveying device is a jet composed of a nozzle and a Venturi tube. Pneumatic conveying pump is used for conveying powder materials. When the conveying distance is less than 500m and the conveying height is less than 40m, it is more economical. The nozzle of the low-pressure dilute phase pneumatic conveying device operates continuously. When conveying powder, it is necessary to fluidized the powder and then enter the injector section.

When the PJP jet pump pneumatic conveying system is equipped with a locking device, the conveying capacity of the material depends on the locking capacity of the locking device.
Based on extensive engineering practice experience, most dilute phase continuous pneumatic conveying processes are as follows:

PJP Type Positive Pressure Dilute Phase Pneumatic Conveying Jet Pump

Dilute Phase Pneumatic Conveying Jet Pump

Customized Pneumatic Conveying Systems

Dilute Phase Pneumatic Conveying Jet Pump Without Dust Pollution Images